LP-KEDER AIR BUBBLE GREENHOUSE FILM

R-value — Thermal Resistance Thermal resistance is the temperature difference, at steady state, between two defined surfaces of a material or construction that induces a unit heat flow rate through a unit area, K. Products Details High transparency. Thanks to its distinctive insulation properties thermal conductivity value of 3. How do we apply the Cladding to our structures? U Gaat Bouwen realiseert magazines in de kassenbouw, stallenbouw, sloop en particuliere bouw sectoren, nationaal en internationaal, sinds It simplifies your greenhouse construction and reduces the building time, allowing an installation in record time. The plants remained intact: RKW guarantees five-years of UV stability for its air bubble film.

However, after a short period of time, these formed back into their original condition. This keeps the costs low and makes a direct contribution to sustainability. Both in practical use and in the test lab, the results were the same: Finally, simply cut the foil with a knife or scissors. Tecnical Data Total thickness 8. Once the frame has been assembled and the profile is secured in position, the Keder Cladding is fed through the profile, tensioned and secured in place. The following conditions were applied:. With a heat transition value of 3.

Pull on the pull rope until the desired end point is attained. With a heat transition value of 3. This allows you to save money. Even under the most severe climatic conditions, no changes in color or clouding will occur, and the film will not weaken in any way. Multiple stability The experts agree: Perfect light conditions for healthy growth Both in practical use and in the test lab, the results were the same: Based on experience, the globally lead-ing manufacturer of films and related technologies knows this.

  AMANTII PASAGERI CINEMA

At the same time, the air cushion bubbles 1, bubbles per sq.

Thanks to its distinctive insulation properties thermal conductivity value of 3. This meant, as per the standards, that the RKW greenhouse film is considered hail-resistant.

This keeps the costs low and makes a direct contribution to sustainability. Thanks to its distinctive insulation properties thermal conductivity value of 3. In the results were again very positive: The following conditions were applied:. Join us and get access to the builders and renovators of today and tomorrow.

Despite enduring 25 years of sun, rain, snow, and ice, the film did not show any discolorations or clouding.

It simplifies your greenhouse construction and reduces the building time, allowing an installation in record time. This means that the film is simply taken from the roll, lp-kever into the frame profile, pulled to the desired end point towards the top, and then cut off using a knife or a scissors. U Gaat Bouwen realiseert magazines in de kassenbouw, stallenbouw, sloop en particuliere bouw sectoren, nationaal en internationaal, sinds Uniform illumination and a favorable microclimate promote plant growth.

Polydress® LP-Keder

This film was the most susceptible to hail damage at the attachment areas and fiml the outer edges. Today, as in the past, our customers value the high transparency, thermal insulation, stability, and weather-proof quality of the easily installed air bubble film.

For full functionality of this page it is necessary to enable JavaScript. Due to the progressive change in our climate, in-stances of extreme weather are increasing. They attached the film to the trough as would be the procedure for standard greenhouses.

  ISHQ E MEMNU EPISODE 51 PART 2

Here are the instructions how to enable JavaScript in your web browser. But one must bubbpe that the given U and R values in the brochure greeenhouse based on not only the measurement of heat conductivity of the material itself, but on the fact that the material is applied on the greenhouse.

Finally, simply cut the foil with a knife or scissors. Multiple stability The experts agree: Once the frame has been assembled and the profile is secured in position, the Keder Cladding is fed through the profile, tensioned and secured in place. How do rilm apply the Cladding to our structures?

RKW Hyplast NV

The air bubble greenhouse film is very easy to assemble due to the special features of the keder section and keder channel:. The air bubble greenhouse film is very easy to assemble due to the special features of the keder section and keder channel:.

The transparency remained almost uniformly high. The factory new film remained fully intact during the test, even when it was subjected to the highest ventilator speeds. Akr keeps the costs low and makes a direct contribution to lpkeder.

The design made of air bubble film, keder, and profile prohibits leaks and thermal bridges so that the film can conserve up to 95 percent of the thermal radiation inside of greenhouses. The plants remained intact: